Every pair of AirPods has a sensor that alerts it whenever you remove these AirPods from the ear, causing it to hang up. When this happens, it is known as automatic ear detection.
So, when you remove your AirPods from your ear, the AirPods transmit the sound to the phone speaker.
The significant part is that you can disable this feature, which brings us to the question, how do you keep your AirPods from hanging up?
You can keep your AirPods from hanging up by disabling the automatic ear detection feature. However, sometimes, the problem is not from your sound settings, and you need to take more dramatic steps to prevent it from recurring.
Why Do My AirPods Keep Hanging Up?
Several reasons your AirPods keep disconnecting mid-way from your apple or other Bluetooth devices.
Some of these problems are a result of bad signal quality, a hardware issue, automatic ear detection, and making use of an outdated version.
It can be frustrating when your AirPods keep hanging up while listening to music or on a phone call.
Unfortunately, this disconnection issue has been ongoing since 2016, when AirPods were released.
AirPods disconnecting was common in various versions in 2016, 2017, and 2018. But of course, you can always report any problems with your AirPods to apple.
Some other disconnection issues you face can be about the sensors in the AirPods that sense when these AirPods are in the ear or to your microphones.
Sometimes, it results from interference with your Bluetooth, whatever the case. Hopefully, it will solve the problem.
How Do I Get My AirPods to Stop Hanging Up?
There are several ways to stop your AirPods from hanging up mid-way, but you must ensure they are not out of power first.
Sometimes, you might have just turned off your Bluetooth without knowing or even selected the wrong audio output; ensure that you check all this connectivity before you proceed.
The steps you should take to ensure that you stop your AirPods from hanging up include the following;
#1. Ensuring the Software, You Have Is the Right One
- AirPods 3 for IOS 15.1 or macOS 12.
- AirPods pro for IOS 13.2 and macOS 10.15.1.
- AirPods 2 work better with IOS 12.2 and macOS 10.14.
#2. Low Battery
Another essential factor you should ensure is that your AirPods battery is completely charged. If it’s not, you will not be able to hear anything.
If you do not know how to check the battery level of your AirPods, a simple way you can do it is by placing your AirPods in the case and leaving the lid open.
Hold the case very close to your iPhone, and then a pop-up will appear on your iPhone screen showing the battery levels.
Another way you can know your AirPods battery level is from battery widgets on your iPhone. To locate this, swipe from left to right on your iPhone and then scroll down.
Keep scrolling down until you see the edit icon, tap on it, and add batteries to your widget if you haven’t.
After doing this, you can now be able to see your AirPods battery percentage along with other apple associated devices like your apple watch.
#3. Check Your Bluetooth
You should ensure you activate your Bluetooth on the device you want to connect your AirPods.
If you realize that the Bluetooth is on, you can still try turning it “on” and “off” again to see if that would work.
#4. Check Your Audio Settings
You should always confirm if your AirPods are the output devices selected. In most cases, this should automatically happen if the AirPods are in your ears.
Even with that, you should always cross-check, just in case. You can also change the output device with the speaker icon.
#5. Disconnect and Reconnect Your AirPods
Turning on and off is a way to solve many problems with gadgets, and AirPods are no exception.
To properly do this with your iPhone;
- Put your AirPods in the case, shut the lid, and wait for about fifteen seconds before opening the lid.
- Press down, hold the setup button at the back of the case, and wait for it to flash amber and then white light.
- With this, your AirPods should be able to reset.
- You can reconnect them by placing them on your iPhone, ensuring that your iPhone Bluetooth is on.
#6. Turn off Automatic Ear Detection
The automatic air detection detects when the AirPods and in and out of your ear, causing them to switch it on or off.
Your AirPods might work better without it. You can quickly turn this feature off by simply opening your settings and going to Bluetooth on your IOS device.
After that, tap on the “I” next to your AirPods and turn off automatic ear detection.
#7. Unpair your Watch
The problem might be pairing your apple watch and AirPods simultaneously, so you should try pairing them off to see if it works.
If you have other devices connected to your Bluetooth that are worth unpairing, you should do so to see if it works.
#8. Clean your AirPods
If you feel your problem is related to dirt, you should gently clean your AirPods. You wouldn’t want to scratch the case or damage the entire setup.
| Why AirPods Keep Hanging up | Possible Solutions |
|---|---|
| Dirt in the AirPods | Clean them carefully |
| Too many paired Bluetooth devices. | Disconnect other devices paired to your Bluetooth |
| Automatic ear detection | Turn off automatic ear detection. |
| Having the wrong software match your AirPods | Update your software to match your AirPods |
| Problems with your audio settings | Reset your audio setting |
Although we’ve provided you with steps on how to reset your AirPods, if that doesn’t work, then you should follow this step instead;
- Place your AirPods in the charging case and then close the lid; wait thirty seconds before re-opening them.
- On your iPhone or iPad, go to the Bluetooth settings list and tap on the small symbol you would find there.
- Tap on the icon, and a new page will appear. Tap on ignore this device and go back to the charging case.
- With the lid open, press the setup button for about fifteen seconds, and bright amber light should be displayed, followed by white.
Can you Turn off Double Tap to Hang up on AirPods?
You can turn off the double tap to prevent your AirPods from hanging up. To do this, follow the steps provided below;
- Open the settings app on your iPhone, tap the Bluetooth menu, and look for your AirPods.
- Tap on the “I” icon close to your AirPods and then scroll to the “double tap on AirPods” option.
- After tapping on it, please choose the option that says switch off, and that’s it.
How do you Turn Off Automatic Ear Detection?
To turn off automatic ear detection on your iPhone, go to settings on your IOS device and tap on it, then scroll down to Bluetooth.
You will find an “I” symbol next to your AirPods, tap on it and deactivate the toggle next to automatic ear detection.
Is Automatic Ear Detection Useful?
Yes, it is. This feature is for people who do not want to go through the stress of playing and pang music.
The automatic eats detection enables the sensors in your AirPods to detect when the AirPods are in your ear and switch them off when they’re not.
If you remove just one AirPods from your ear, your music, or whatever you were using the AirPods for, will stop and resume when you place them back in.
When you remove both AirPods from the ear, the activity stops and does not resume even when you place them back in.
If you do not like this feature, you can always temporarily disable it by going to the setting and following the necessary steps provided above.
Why Do AirPods Hang Up Calls When Removed?
Is it relatively normal when your AirPods disconnect when listening to music or even a podcast due to a drop in signal, but disconnecting calls is a different case?
There are several reasons why this happens and, likewise, several fixes also. Two common reasons your AirPods disconnect you from a call include the following;
- Low battery.
- Incorrectly set microphone.
To be safer, you should ensure that you charge your AirPods before using them. In addition, this problem might occur if you don’t set your microphones correctly.
#1. To reset the microphone,
- Open your AirPods lid case, go to the settings, and then Bluetooth.
- Select the “I” icon that you would find and select microphone from the menu.
- The default microphone setting is automatic. Try changing it to either left or right.
#2. To reset the network settings on your iPhone;
- Go to settings and tap on general, and then reset.
- Then tap on the network reset setting.
- If required, fill in your passcode, as this clears the cellular and wi-fi networks that have been saved.
- After that, you can now remove any VPN settings that you have there.
Final Thoughts
Your AirPods hanging up is not too difficult to fix effortlessly without having to call on a technician.
Once you follow the steps we provided, your AirPods will work okay; yet again, it all depends on your settings.
If, after trying to fix this issue, your AirPods still keep hanging you, then you can call on a licensed technician.
