9 Ways To Make Airpods Read Messages Louder!

Photo of author

By John Smith

Despite Apple’s widespread popularity, Their airpods have several performance concerns, including volume that isn’t loud enough, particularly in noisy environments.

When trying to listen to a phone message or conversation, the ambient noise prevents you from hearing the other person. 

And maybe you want to listen to messages on your way to the office. But even with the volume turned up, your AirPods remain quite muffled.

Using an equalizer setting is the quickest method to make your Airpods read out louder messages. The iOS Music settings (found at Settings > Music) offer various music presets, with the Late Night preset being the most helpful for increasing AirPods’ loudness.

How Do I Get My Airpods to Read Messages Louder?

Airpods Read Messages Louder

These procedures for troubleshooting AirPods are, for the most part, quick and easy. Give each one a shot to see if any of them can fix the sound problems you’re having.  

You might be having trouble pairing the AirPods, experiencing difficulties with sound settings, or hearing a lesser quality of music because the battery life of the AirPods is getting too low.

If there is no immediately apparent issue, you should proceed through the troubleshooting procedures presented below until you reach the step that puts an end to the problem.

#1. Increase the iPhone’s Volume

Since the AirPods don’t come with volume control, you’ll have to use the one on your iPhone to adjust how loud the sound is.

 However, due to how easy it may be to ignore, this is an excellent location to begin looking.

#2. Disable Low Power mode

If the iPhone is set to Low Power mode, it may harm certain non-essential systems, resulting in the audio being played at a lower volume than normal.

Turn it off, and use your AirPods with your iPhone while in the usual power mode.

#3. You Must Charge AirPods

There is a possibility that the AirPods will misbehave if they have a low battery. So first, give the batteries an hour or two to fully charge, and then run another audio test.

#4. Turn off Any EQ Settings

Even the EQ settings with the word “Booster” in their names make most of the sound played through the AirPods sound softer. Therefore, it is recommended that the equalizer be turned off.

#5. Turn off the Option to Reduce Loud Sounds

There may be a setting that’s been enabled that caps the volume at its maximum.

You can turn off this function with only a couple of taps by going into the Settings app and following these steps: Sounds & Haptics > Headphone Safety > Reduce Loud Sounds.

Now, if the Reduce Loud Sounds setting is already deactivated (the slider is not green). The headphones will become less noisy once you turn on the Reduce Loud Sounds feature.

There is a slider in the Sounds & Haptics area that you can use to increase the volume of the alerts because the sound for those functions is too quiet. 

This part of the interface is known as the Ringer and Alerts section.

#6. Adjust iPhone and AirPods sound

Possibly, the phone and the AirPods have two distinct conceptions of the lowest and maximum loudness levels.

While listening to messages with your AirPods, ensure the volume on your iPhone is turned down.

Turn off the Bluetooth. Start playing messages on your iPhone so that it comes out loud, and then lower the volume on your iPhone until it is entirely silent. 

Next, turn on the AirPods’ Bluetooth and then reconnect them. Note that this issue does not arise frequently; however, recalibrating the audio levels only takes a couple of minutes, so you should attempt it.

#7. Check Both Earbuds’ Volumes

It’s possible that you changed the settings on your iPhone’s accessibility menu so that the earbuds play at a different volume. 

First, navigate the Settings app on your iPhone, then go to Accessibility > Audio/Visual. Check that the slider is level by positioning the button in the center of the L and R markings.

#8. Repair AirPods 

This can occasionally fix issues with AirPods or, more generally, other Bluetooth devices. 

Before you attempt to pair your devices, navigate to the Bluetooth settings on your phone. Press the information icon next to the AirPods, and pick the option to Forget This Device.

#9. Clean AirPods

If none of those solutions worked to fix the sound issue, you should give the earbuds a thorough cleaning.

Earwax tends to accumulate on the Apple AirPods because they are worn in the ear for long periods. 

When there is buildup, thorough cleaning can make a discernible difference in the appearance.

Why Can I Barely Hear Siri in My Airpods?

You may not understand what Siri is saying because it has volume control. In the same way that the volume of the headphones, phones, and speakers can all be adjusted with the same dial. 

You can also adjust the volume of Siri independently. And also raise the volume by turning on Siri and then utilizing the controls on the side of the phone.

You could also head to settings, then general, then Bluetooth in your device’s settings. To utilize Siri without Bluetooth, you first need to switch off Bluetooth on your device.

You must turn it off to have a better and undistorted experience using the Apple Virtual Assistant.

Siri is inaccessible when Bluetooth is turned “on,” The only way to hear it is to utilize Bluetooth. And it would work efficiently once more.

Why Are My Airpods Not Reading Texts Anymore

It is possible that your AirPods cannot read messages because they have been reset to their factory settings; this has to be examined. 

However, if you cannot hear Siri’s reports, we suggest you check the tips carefully.

  • Check to see if the device you’re using supports the feature.
  • Verify that your AirPods or the Beats headphones are compatible with your device by navigating to Settings > Bluetooth.
  • Make sure that the option to Announce Notifications is switched on by selecting Settings > Notifications > Announce Notifications and selecting that option.
  • Ensure that your Apple iPhone or iPad is secured and the screen is turned down. Siri doesn’t send out a message if you’re using your smartphone.
  • If the problem continues, you should reset your AirPods and try using them again. 

Here is a quick guide: 

  • Place your AirPods in the charging case, and ensure the cover is closed.
  • Wait for 30 seconds.
  • Turn the latch to the open position on your charging case.
  • Navigate to Settings > Bluetooth on your iPhone and then hit the “More Info” button next to your AirPods.

 Proceed to the next step if you cannot locate your AirPods in the Settings > Bluetooth menu.

  • Select the Forget This Device option, and then select it once again to confirm.
  • While the lid is open, push and maintain pressure on the setup button at the device’s rear for about fifteen seconds or until the indicator light alternately flashes amber and white.
  • To repair your AirPods, bring your iOS device close to the charging case while leaving the lid open. Follow the instructions that are displayed on the screen of your smartphone.

Why Is Siri so Quiet on Carplay?

Due to the necessity for a firmware update to work with the most recent iOS version, Siri may not be very loud while using Carplay. 

If that turns out to be the case, Audi will have to carry out that upgrade before Siri can start functioning normally again.

Nevertheless, under Audi’s sound settings, there is a volume setting referred to as the “voice dialog system” that regulates the audio for Siri.

If you recently took your car in for servicing, the volume might have been turned down, despite the default setting being for it to be at 50% of the maximum level. 

Once you locate this setting, everything will return to normal for you. Then you can reset your Carplay for proper functioning.

Below is a valuable guide to setting up your Carplay:

  • Connect your iPhone to the car’s USB port using the Lightning cable if your vehicle supports Apple’s CarPlay system.
  • Possibly, the USB port will be designated with a symbol for CarPlay or a smartphone. Ensure you utilize a cable connecting an Apple Lightning device to a USB port.
  • Connecting your iPhone to the car’s USB port is the wired alternative to using CarPlay if your vehicle has one.
  • You will receive a notification on your iPhone offering you a Wi-Fi connection throughout your subsequent car rides.
  • Holding the button for voice commands on the steering wheel is necessary if your vehicle’s only type of CarPlay compatibility is wireless.
  • Put your audio into Bluetooth or wireless mode. Then, navigate to Settings > Wi-Fi on your iPhone and double-check that the Wi-Fi function is activated.
  • Tap the CarPlay option and ensure the Auto-Join setting is on the menu. After that, navigate to Settings > General > CarPlay, and choose your vehicle from the list.

Well, here are facts about Apple AirPods:

FactsCapabilities
ChargingCharges for fifteen minutes
WaterproofAirpods 2 are waterproof
Easy AccessThey are easily accessible and conventional
Wireless ChargeAirpods 2 can charge on a charging pad

Conclusion

You should know how to utilize Siri and make the AirPods read messages at a more suitable volume. 

Since every technology has limitations and imperfections, troubleshooting might help you find a quick solution to why Siri is not responding.

Leave a Comment