Airpods generally make different sounds as a means of notification. Each sound differs in different Airpods, but they are all relevant to the function.
Your airpods making sounds shouldn’t give you much concern. However, in some cases, the sound could mean something more serious.
Therefore, it is best to understand what every ding sound means. It would help to go through this article to understand the sound better.
Your Airpods make a ding sound to notify you of different functions. For example, it uses a ding sound to alert you of low battery before the Airpods go off. Additionally, the ding sound could alert you of a successful connection. It also makes a ding sound when there is a technical or connection issue.
Why Do My Airpods Make a Ding Sound?
Your Airpods making a ding sound is generally to notify you of something. It is a way your Airpods alert you of technical issues that could affect them.
The major causes of the ding sounds are below.
#1. Low Battery
One of the major causes of your Airpods making a ding sound is a low battery. It is common for Airpods to make a dingy sound when running low on battery.
The sound notifies you to charge your Airpods before they finally run out of battery. For example, your Airpods might run out of battery and die shortly after making the sound.
#2. Connection Notification
Airpods make a ding sound when they establish a connection to any device. The sound is to notify you that the connection was successful.
The ding to notify you of the connection would sound immediately after taking the Airpods out of the case. Though, you should hear this connection ding sound once.
However, the Airpods can make consistent ding sounds while switching between devices, especially if connected to multiple Apple devices.
The devices would keep making the airpods switch automatically. You need to disconnect all the devices and reconnect to the device you want.
#3. Switching Modes
It is common for models like the Airpod pro to make a ding sound when switching between noise canceling to transparent mode.
Squeezing the stem of your Airpods pro for a few seconds would make it switch modes. So, you should probably check how tight you were squeezing the stems of your Airpods.
#4. Damaged Airpods
Your Airpods would make a ding sound when they are damaged. The ding sounds, in this case, would happen even when your Airpods are not in use.
You will hear the sounds from time to time, irrespective of a connection to a device or not. In this case, it is best to take the Airpods to an apple store for repair.
#5. Poor Connection
Airpods also make a ding sound when they connect poorly to a device. The reason is either the device does not connect properly, or you are not close to the device.
#6. Faulty Device
Your Airpods will make dingy sounds if there is a fault with the device you are connecting to. It would help to connect the device to other Airpods to confirm this.
#7. Airpods Need Updating
Lastly, your Airpods might make ding sounds if they need updating. It is because your Airpods software also needs updating sometimes. You can connect them to an Apple device for updates.
What to Do When Your Airpods Make a Ding Sound?
It is best to identify why your Airpods make a ding sound so you can troubleshoot it. Some simple solutions help to fix every ding sound.
The troubleshooting tips for your Airpods making a ding sound are below.
#1. Reconnect to Your Device
The first solution is disconnecting and reconnecting your Airpods to the device in use. Try the following to reconnect your Airpods.
- Open the device functions for the Airpods.
- Select ‘Forget’ to disconnect the Airpods.
- Return the Airpods into their casing.
- Let the Airpods rest for about 30 seconds.
- Next, open the lid of the Airpods case and locate the button on it.
- Long press the button.
- Then, reconnect the Airpods to the device.
#2. Disconnect Multiple Devices
If your Airpods are switching between devices, you must disconnect all the devices. Then, reconnect the Airpods to the only device you want.
#3. Connect Another Device
Disconnect your Airpods from the current device and reconnect them to another device. It will help you to know if your Airpods or devices are the problems.
If the Airpods are the problem, it is best to take them for repair. The ding sounds should stop after the repair.
#4. Update Airpods
You should ensure your Airpods are always up to date. Connect the Airpods to any Apple device to update them automatically.
#5. Use Airpods in Different Locations
It would help to be close enough to the connected device. Also, you should try a location without interference to fix the poor connection.
#6. Take Airpods to the Apple store
Suppose the ding sound doesn’t stop after trying all the solutions. Then, it would be best to take them to an Apple store for repair or replacement.
Why Do My Airpods Keep Making Connection Noise?
Your Airpods making a connection noise can be quite loud and annoying, especially when they persist. Although, a lot of people relate sound issues as a normal Airpods problem.
However, Airpods do not make noise unless there is a major issue with their function. The reasons for your Airpods making a connection noise are below.
#1. Pairing Problems
One of the common reasons for the connection noise is when there is a pairing problem with your phone. It happens when the Airpods and your phone do not pair correctly.
#2. Damaged Airpods
If your Airpods keep making noise irrespective of the device they are connected to or even when they are not in use, the Airpods are probably damaged.
#3. Bad Bluetooth Connection
Airpods use Bluetooth to connect to any device successfully. However, the connection always requires you to stay close to the connected device.
If you are not close enough to the device, the Airpods will make a connection noise because of an interruption in the Bluetooth signal.
#4. Connection Interference
Interference from other devices in the vicinity can cause connection noise too. For example, the Airpods create noise when they interact with these devices.
Although, your Airpods making connection noise could seem serious since they affect the sound output.
However, there are simple solutions to these issues outlined below.
| Causes | Solutions |
|---|---|
| Bad Bluetooth connection | You need to move closer to the connected device. |
| Pairing problems | Turn off and turn on the Bluetooth, and reconnect your Airpods. |
| Damaged airpods | Take them to an Apple store for troubleshooting. |
| Connection interference | moves to another location without obstacles. |
Why Do My Airpods Pro Beep Loudly?
Your Airpods pro beeps loudly because of the following reasons.
#1. Low Battery
A loud beep sound notifies you of a low battery when the capacity is below 10%. The beep continues until the battery reaches 1%, then the Airpods turn off automatically.
It would be best to charge the Airpods when you hear the beeps and leave them to charge fully. Then, the Airpods would automatically reactivate the alert system once it fully charges.
It is normal for Airpods to beep constantly when the battery is low. However, a faulty battery makes them beep this way when the battery is full.
#2. Faulty Battery
Fast battery drainage in your Airpods will make them start beeping earlier than you expect after charging them fully. Unfortunately, it means the Airpods now have battery issues.
Sometimes, it could be one of the pods making this sound. But, then, it means that the pod is experiencing fast battery drainage alone.
#3. Switch the Ear Tips
Your Airpods could make beep sounds if you don’t insert the ear tips correctly. So you need to change the ear tips to a new one.
If your ear tips are the default ones from your Airpods pro, it is time to switch to a different type of ear tip.
#4. Switching Modes
The Airpods pro makes a beep sound once you switch modes from noise muffling to transparent mode.
#5. Successful Connection
Your Airpods pro beeps once you successfully connect to a device. The one-time beep is to notify you of the successful connection.
#6. Connection Issues
Your AirPods pro beeping more than once while connecting to a device means the connection was unsuccessful. You need to stop the process and try reconnecting again.
An incorrect connection could cause your Airpods pro to beep multiple times. You need to adjust the connection status from your phone’s Bluetooth settings.
#7. Damaged Airpods
Your Airpods pro would beep multiple times when they are damaged. Furthermore, the beep sound would occur irrespective of a full battery or successful connection.
The beeps usually mean your Airpods need repairing and could eventually stop working when you don’t repair them. Therefore, it is best to repair them soon before it gets worse.
#8. Wet Airpods
Your Airpods pro would make a beeping sound when they get wet. So it is best to keep them away from water and heat so you don’t damage them.
#9. Noisy Environment
Airpods pro can adjust the volume according to the noise from your environment. The volume increases in a loud environment and reduces in a quiet environment.
The attempt to adjust could make the airpods beep occasionally. It would help to turn down your Airpods pro overall volume from your phone to fix the issue.
#10. Hardware or Software Problems
Lastly, the only reason your Airpods pro would keep making beep sounds apart from other causes is because of issues with the hardware or software.
You need to update the firmware to the latest version to fix this issue. You should always check the settings to know if the airpods need updating.
Conclusion
Ultimately, it is normal for your Airpods to make sounds from time to time. However, understanding every sound would help you know how to fix it.
You should now be able to troubleshoot any sound issue after going through this article. Although, it is best to seek professional help if you can’t seem to get it fixed.
